Search:

Home | Book Reviews


Different Types of Drill Presses and Some Safety Tips Using the Drill Press

By: Thomas Kuba

A drill press is an everlasting style of drill that can be bolted upon the floor or anchored on a stand or workbench. It helps to drill holes in wood, metal and an assortment of other materials. A drill press produces precise holes. Repetitious holes can be drilled in the similar spot and at the same deepness precisely and quickly.

Speed can be adjusted through changing pulleys and belts. To drill big holes usually requires a slower speed.

The floor-standing drill press is more powerful and you can use it with various types of materials. The bench-top drill press is much more handy. These two types of drill presses are the best for lighter and easier jobs.

In addition to drilling a hole, there are too several types of bits and attachments you may purchase to add flexibility to the tool. This contains mortise bits, planer heads and standing drums.

Listed below are different types of drill presses
- Floor Model Drill Press - This drill press is the most loved kind of drill that can be purchased in professional wood shops. It has longer columns and higher power motors. The column length of this floor drill presses are regularly 66'' to 72'' high. The advantage of this sort of press is it allows you to handle longer work pieces for the reason that the workbench can actually run the full length of the column. The general cost of this drill press varies from 400 to 1,000 US dollars.

- Ryobi DP121l Drill Press - This is a type of 12-in bench top with multi-features. It has a dual laser type of guide, a 500-3000 RPM ability to perform, a L.E.D work light, together with speed readout. Speed can be adjusted simply by moving a lever from the left housing, or adjusting the pulleys and belts. The average price is around 120 US dollars.

- 5 Speed Bench Drill Press - This is painless to use and can drill faster. The 5 spindle speed of this drill press is good for drilling steel, wood, plastic or aluminum. It has a completely adjustable table with an angle indicator. The general amount of this drill press is 130 US dollars.

- Radial Drill Press - This drill press has an adjustable movable spindle. It is ideal on hard work, when many holes are need to be drilled.

Safety tips when you use a drill press
- At all times be mindful where you are putting your fingers to avoid accidents.
- Do not use bits that are bent, damaged or dull.
- Ensure the bit is centered in the chuck and tightened before operating the drill.
- Take a clamp when drilling metal to avoid the material spinning to your hand or body.
- Never get started the drill press before clearing the bench.
- Never use drill bits that have a screw tip.
- Do not activate your drill press with the drill bit is in contact with your work piece.
- Avoid dangerous hand positions.
- Avoid drilling materials that do not have a flat surface.
- Do not wear neckties or gloves when operating the drill press.

Article Source: http://www.articlehotline.com/articles

Read more drill press reviewsand see where you can buy your new or used drill pressat Drillpressreview.com

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Book Reviews Articles Via RSS!

Powered by Article Dashboard